{"id":34078,"date":"2025-12-23T04:22:03","date_gmt":"2025-12-23T12:22:03","guid":{"rendered":"https:\/\/www.privateinternetaccess.com\/blog\/?p=34078"},"modified":"2025-12-29T04:39:54","modified_gmt":"2025-12-29T12:39:54","slug":"no-network-connection","status":"publish","type":"post","link":"https:\/\/www.privateinternetaccess.com\/blog\/no-network-connection\/","title":{"rendered":"No Network Connection: Why Is My Internet Not Working?"},"content":{"rendered":"\n

You\u2019re ready to settle in with a Netflix show, but the \u201cNo network connection\u201d message shows up right when you need the internet. This can happen for a few different reasons, and each one points you in a different direction when you\u2019re trying to fix it.\n<\/p>\n\n\n\n

In this article, we\u2019ll cover what the \u201cNo network connection\u201d error means, what\u2019s causing it, and what you can do to get back online again quickly.\n<\/p>\n\n\n\n

What Does No Network Connection Mean?<\/h2>\n\n\n\n

The \u201cNo network connection\u201d message pops up when your device can\u2019t get online \u2013 either it isn\u2019t communicating with the router, or the router itself can\u2019t reach the internet. \n<\/p>\n\n\n\n

No Network? Common Causes Explained<\/h2>\n\n\n\n

There are a few common reasons your device might not be able to get online. Knowing what\u2019s going on can help you figure out the cause before you start fixing it.\n<\/p>\n\n\n\n

    \n
  1. You can\u2019t access the network<\/strong>: Maybe the router\u2019s off, the cable is unplugged, or you\u2019re just too far from the Wi-Fi signal. In this situation, your device has nothing to connect to, so going online isn\u2019t possible.\n<\/li>\n\n\n\n
  2. Connected to Wi-Fi but have no internet access<\/strong>: Your device is connected to the router, but the router itself can\u2019t reach the internet. That can happen if your internet provider is down, the modem isn\u2019t working right, or the network isn\u2019t configured properly.\n<\/li>\n\n\n\n
  3. Cellular network unavailability<\/strong>: Your phone can\u2019t reach your carrier\u2019s towers, so cellular data won\u2019t work. Weak coverage, a SIM card issue, or a wider network outage can all trigger this message.\n<\/li>\n<\/ol>\n\n\n\n

    Quick Fixes: Try These First<\/strong><\/p>\n\n\n\n\n\n

  4. Restart your router to refresh the connection.\n<\/li>\n\n\n
  5. Reboot your device to clear temporary glitches.\n<\/li>\n\n\n
  6. Check if any networking cables are plugged in firmly.\n<\/li>\n\n\n
  7. Toggle Airplane Mode off and on to reset the wireless signal.\n<\/li>\n\n\n
  8. If you\u2019re using a VPN, temporarily turn off the kill switch.\n<\/li>\n\n<\/div>\n\n\n\n

    Diagnosing The Problem (Step-by-Step)<\/h2>\n\n\n\n

    When a \u201cNo network connection\u201d alert pops up, begin with the basics, and then rule out issues one by one:\n<\/p>\n\n\n\n

    Check if It\u2019s an ISP Outage<\/h3>\n\n\n\n

    First, see if your internet provider is having issues. You can switch to cellular data to check websites or use your ISP\u2019s service status page. Sites like Downdetector show outages reported by other users. You can also find the latest updates on your provider\u2019s social networks.\n<\/p>\n\n\n\n

    Check Router and Modem Lights<\/h3>\n\n\n\n

    Look at the lights on your router and modem:\n<\/p>\n\n\n\n\n

  9. Steady green or white lights usually mean the local network is working. \n<\/li>\n\n\n\n
  10. Blinking lights mean your modem is booting or connecting.\n<\/li>\n\n\n\n
  11. Red lights can point to a problem connecting to the internet.\n<\/li>\n\n\n\n\n

    Is It Just One Device or All Devices?<\/h3>\n\n\n\n

    Identify if the problem affects only one device or all devices in your home. If it\u2019s just one, the issue is likely on that device \u2013 usually driver problems or network settings. If every device is offline, your router or your ISP is likely creating problems. In that case, try restarting your router and, if that doesn\u2019t work, contact your ISP to check for outages or account issues<\/a>.<\/p>\n\n\n\n

    This way, you\u2019ll narrow down the cause before you start with fixes. Now, let\u2019s dive deeper into device-specific solutions: \n<\/p>\n\n\n\n

    Jump to solutions for: iPhone<\/a> | Android<\/a> | Windows<\/a> | Mac<\/a> | Smart TV<\/a> | Gaming Consoles<\/a> | Linux<\/a><\/p>\n\n\n\n

    Fixing No Network Connection on Phones<\/h2>\n\n\n\n

    If you\u2019ve already tried our quick fixes<\/a> and are still left wondering why your phone says \u201cNo network connection,\u201d here are some useful tips you can try before you lose your temper.<\/p>\n\n\n\n

    iPhone Connection Issues<\/h3>\n\n\n\n
      \n
    1. Wi-Fi connection issues<\/strong>: If your iPhone can\u2019t connect to the Wi-Fi network, there might be an issue with your router, Wi-Fi settings, or your network. Here\u2019s what you can do:<\/li>\n<\/ol>\n\n\n\n\n\n\n
    2. Check your Wi-Fi router<\/strong>: Confirm the router is compatible with your device and is running the latest firmware. Also, make sure the router is powered on and within range.<\/li>\n\n\n\n
    3. Reset your network<\/strong>: Another option you should try is the network settings reset. Simply go to your iOS device\u2019s Settings and navigate to General. <\/li>\n\n\n\n\n
      \"\"<\/figure>\n\n\n\n

      Scroll down and tap Transfer<\/em> or Reset<\/em>.<\/p>\n\n\n\n

      \"\"<\/figure>\n\n\n\n

      Then tap Reset<\/em>. This clears all cellular settings, Wi-Fi networks and passwords, and VPN configurations. Your apps, photos, and personal data won\u2019t be affected.<\/p>\n\n\n\n

      \"\"<\/figure>\n\n\n\n\n
    4. Uninstall VPNs or security software<\/strong>: A VPN can interfere with your connection by changing your DNS settings, using a kill switch that blocks all traffic, or misconfiguring split tunneling so some apps can\u2019t get online. Security apps like firewalls or antivirus tools can cause similar issues by blocking network access. If you uninstall them, restart your device and try connecting again.\n<\/li>\n\n\n\n\n
        \n
      1. Problems with the SIM card<\/strong>: If you get the \u201cNo SIM\u201d or \u201cInvalid SIM\u201d error, your iPhone isn\u2019t recognizing your SIM. That can happen if you didn\u2019t install it properly, or if it\u2019s physically damaged. <\/li>\n<\/ol>\n\n\n\n\n\n\n
      2. Reinsert the SIM<\/strong>: Use a SIM-eject tool or a paperclip to access the SIM tray, then remove the card, clean it with a soft cloth, and put it back in.<\/li>\n\n\n\n
      3. Check SIM activation<\/strong>: If it doesn\u2019t work, check with your provider if the SIM card is active or needs a replacement.<\/li>\n\n\n
      4. Check the carrier lock<\/strong>: Lots of iPhones are carrier-locked, and this might be the case with your device. You can easily check by going to your phone\u2019s settings, then tapping on General > About. You\u2019ll see the Carrier Lock field with a carrier name if it\u2019s locked, or No SIM restrictions if not.<\/li>\n\n\n\n
        \"\"<\/figure>\n\n\n\n
          \n
        1. Could not activate cellular data network message<\/strong>: If turning cellular data off and on doesn\u2019t help, and you have tried to reset your network<\/a>, the next step is to check for available updates and manually update your carrier settings.<\/li>\n<\/ol>\n\n\n\n\n\n\n
        2. Update your OS<\/strong>: Go to Settings > General > Software Update<\/em>.<\/li>\n\n\n\n
          \"\"<\/figure>\n\n\n\n

          If there\u2019s an available update, tap Update now, or schedule an automatic update, enter your passcode if prompted, and follow the instructions.\n<\/p>\n\n\n\n

          \"\"<\/figure>\n\n\n\n\n
        3. Update your carrier settings<\/strong>: You should simply tap Settings > General > About<\/em>. If an update is available, a pop-up will appear automatically.<\/li>\n\n\n\n\n
            \n
          1. Data plan problems<\/strong>: If nothing else works, check whether your cellular data is disabled by your plan or if you\u2019ve reached your data limit. Some carriers automatically block or slow data once you hit the monthly cap. You can log into your carrier\u2019s app or website to confirm your data usage and make sure your plan is still active.\n<\/li>\n<\/ol>\n\n\n\n\n\n

            Android Connection Issues<\/h3>\n\n\n\n

            Even though similar to iOS problems, Android phones can run into some device-specific errors. If switching between cellular and Wi-Fi data and reinserting the SIM card doesn\u2019t help, try these fixes:\n<\/p>\n\n\n\n

              \n
            1. Cellular\/Mobile network not available message<\/strong>: This message means that your phone can\u2019t reach your carrier\u2019s network, indicating a problem with your cellular settings, which has nothing to do with your Wi-Fi. \n<\/li>\n<\/ol>\n\n\n\n\n\n\n
            2. Update your software<\/strong>: Go to Settings<\/em> and navigate to Software update<\/em>. If there\u2019s a red dot next to it, that means your phone is running on outdated software. \n<\/li>\n\n\n\n\n
              \"\"<\/figure>\n\n\n\n

              Click Download<\/em> and Install<\/em>, or schedule an Auto download<\/em>, and you\u2019re good to go.\n<\/p>\n\n\n\n

              \"\"<\/figure>\n\n\n\n\n
            3. Reset APN to Default<\/strong>: This step resets your APN (Access Point Name) to your carrier\u2019s default settings so your phone can connect properly to the network.<\/li>\n\n\n\n\n

              Go to Settings<\/em> and then tap on Connections<\/em> (Samsung) or Network & Internet<\/em>. Then, find Cellular\/Mobile networks<\/em>.\n<\/p>\n\n\n\n

              \"\"<\/figure>\n\n\n\n

              From there, go to Access Point Names<\/em>.<\/p>\n\n\n\n

              \"\"<\/figure>\n\n\n\n

              Choose Reset to default<\/em> by tapping on a 3-dot menu in the top right corner.<\/p>\n\n\n\n

              \"\"<\/figure>\n\n\n\n
                \n
              1. Wi-Fi authentication errors<\/strong>: You\u2019ll see this when your phone can\u2019t log in to the Wi-Fi network. \n<\/li>\n<\/ol>\n\n\n\n\n\n\n
              2. Reconnect to the network<\/strong>: Go to Settings > Connections > Wi-Fi<\/em>.<\/li>\n\n\n\n\n
                \"\"<\/figure>\n\n\n\n

                Then, choose your Wi-Fi, and click on the gear icon next to it.<\/p>\n\n\n\n

                \"\"<\/figure>\n\n\n\n

                Next, find Forget<\/em> at the bottom of the screen. Now, restart the router and rejoin the network. You\u2019ll need to enter your password again.<\/p>\n\n\n\n

                \"\"<\/figure>\n\n\n\n\n
              3. Reset your network settings<\/strong>: Keep in mind that this will delete all your saved Wi-Fi networks, so make sure you have all the passwords. Find the System tab in Settings<\/em>, or General Management<\/em> if you\u2019re using Samsung.\n<\/li>\n\n\n\n\n
                \"\"<\/figure>\n\n\n\n

                Then, go to Reset options<\/em>.<\/p>\n\n\n\n

                \"\"<\/figure>\n\n\n\n

                Finally, choose to reset your Wi-Fi settings:<\/p>\n\n\n\n

                \"\"<\/figure>\n\n\n\n\n
              4. Failed IP address<\/strong>: When you get the \u201cFailed to Obtain IP Address\u201d message, your phone can\u2019t get an IP address from the router and won\u2019t connect to Wi-Fi. Try reconnecting to the network and resetting your network settings<\/a>. If that doesn\u2019t work, here\u2019s what to do:\n<\/li>\n\n\n\n\n\n\n\n
              5. Assign a static IP address<\/strong>: If your phone keeps failing to get an IP address automatically, try setting a static IP<\/a> address. Go to your Wi-Fi settings<\/em> (in the Connections<\/em> tab), and select your network.\n<\/li>\n\n\n\n\n
                \"\"<\/figure>\n\n\n\n

                Then, click on IP settings<\/em> and pick Static<\/em>.<\/p>\n\n\n\n

                \"\"<\/figure>\n\n\n\n

                Next, change the last digit of your IP address \u2013 any number between 1 and 225 usually works \u2013 and save the settings. Try reconnecting afterward to see if the issue clears up.\n<\/p>\n\n\n\n

                \"\"<\/figure>\n\n\n\n\n
              6. Turn off MAC address randomization<\/strong>: Some routers don\u2019t play well with randomized MAC addresses. On your phone, go to Wi-Fi settings and find your network. Then, tap the gear icon or network name, and find Privacy or MAC address type<\/em> (on Samsung).\n<\/li>\n\n\n\n\n
                \"\"<\/figure>\n\n\n\n

                Change the MAC address from Randomized MAC<\/em> to Use device MAC or Phone MAC<\/em> (on Samsung). This disables randomization and makes it easier for the router to recognize your phone and give it a proper IP address.\n<\/p>\n\n\n\n

                \"\"<\/figure>\n\n\n\n
              7. Samsung-specific solutions<\/strong>: Samsung\u2019s UI can look slightly different than other Android phones, so menu paths may vary a bit. Also, Samsung\u2019s software includes several features that can interfere with network connectivity:\n<\/li>\n\n\n\n\n\n\n

                1. Check Samsung power saving options<\/strong>: Samsung\u2019s power-saving modes can disable 5G, restrict background data, or slow down network reconnections.\n<\/p>\n\n\n\n

                Under Settings, tap Battery<\/em>, and turn off:<\/p>\n\n\n\n\n

              8. Power saving<\/em>.<\/li>\n\n\n\n\n
                \"\"<\/figure>\n\n\n\n\n
              9. Adaptive protection<\/em> (under Battery Protection<\/em>).<\/li>\n\n\n\n\n
                \"\"<\/figure>\n\n\n\n

                2. Review background usage limits (Samsung-only feature)<\/strong>: Samsung aggressively closes apps to save battery power, which can cause the \u201cNo network connection\u201d error or delayed data issues in certain apps.\n<\/p>\n\n\n\n\n\n

                Go to your Settings > Battery > Background usage limits<\/em>, and then turn off Put unused apps to sleep<\/em>.<\/p>\n\n\n\n

                \"\"<\/figure>\n\n\n\n

                Under Sleeping apps<\/em>, remove apps that rely on constant data.<\/p>\n\n\n\n

                \"\"<\/figure>\n\n\n\n\n

                Fixing No Internet Connection on Computers<\/h2>\n\n\n

                If you\u2019ve already tried rebooting your computer and restarting your router, here are some device-specific fixes that might help:<\/p>\n\n\n

                Windows 10 and 11 Solutions<\/h3>\n\n\n

                Windows devices can run into several common network errors. Most of them are easy to fix once you know where to look. Here\u2019s how to localize the problem first.<\/p>\n\n\n

                \n

                Run the Network Troubleshooter<\/strong>.<\/p>\n\n\n

                Windows has a built-in tool that can automatically detect and fix common connection issues. It can reset your adapter, detect DHCP or gateway problems, and often restore your connection in seconds.<\/p>\n\n\n

                Go to Settings > Update & Security > Troubleshoot<\/em>.<\/p>\n\n\n

                \"\"<\/figure>\n\n\n

                Then, click on Additional troubleshooters<\/em> and run Internet Connections<\/em>.<\/p>\n\n\n

                \"\"<\/figure>\n\n\n

                If it doesn\u2019t solve the issue, use the next steps for deeper fixes.<\/p>\n<\/div>\n\n\n

                To localize the problem, switch between Wi-Fi and Ethernet<\/strong>. If your device supports both, try switching from Wi-Fi to Ethernet or the other way around. This helps you figure out where the problem is.<\/p>\n\n\n\n

              10. Wi-Fi-only problems<\/strong><\/a>: If Ethernet works but Wi-Fi doesn\u2019t, the issue is likely with your router\u2019s wireless settings, signal strength, or Wi-Fi driver. Try restarting the router, updating Wi-Fi drivers<\/a>, or reconnecting to the network.<\/li>\n\n\n\n\n
              11. Issues with Ethernet<\/strong><\/a>: If Wi-Fi works but Ethernet doesn\u2019t, then your LAN cable, Ethernet port, or router\u2019s LAN settings might be faulty. Try a different cable or a different port on your router.<\/li>\n\n\n\n\n
              12. Device or ISP problems<\/strong><\/a>: If neither works, the issue is probably with your device\u2019s network settings or your internet provider. You can try flushing your DNS cache (step 3 below) or resetting TCP\/IP (step 4), but if the problem is with your ISP, you\u2019ll need to contact your provider for help.<\/li>\n\n \n\n

                Now that we know where the problem is, you can go with any (or all) of these fixes (don\u2019t forget to do the quick fixes<\/a> first).<\/p>\n\n\n\n\n

                1. Wi-Fi-only problems<\/strong>: The most common error messages in this scenario are \u201cConnected to local network only\u201d and \u201cConnected but no internet,\u201d which basically means your device can reach your router but not the internet. Try this:<\/p>\n\n\n

              13. Update your network drivers<\/strong>: Right-click Start > Device Manager > Network adapters<\/em>.<\/li>\n\n\n\n\n
                \"\"<\/figure>\n\n\n

                Double-click your Wi-Fi adapter and choose Update driver<\/em>. If Windows finds a new version, install it and restart your PC.<\/p>\n\n\n

                \"\"<\/figure>\n\n\n
              14. Reconnect to the network<\/strong>: Go to Settings > Network & Internet > Wi-Fi > Manage known networks<\/em>.<\/li>\n\n\n\n\n
                \"\"<\/figure>\n\n\n

                Select your network and choose Forget<\/em>. Connect again and re-enter the password.<\/p>\n\n\n

                \"\"<\/figure>\n\n\n

                2. Ethernet-only problems<\/strong>: If Wi-Fi works but Ethernet doesn\u2019t, your cable, port, or router\u2019s LAN settings may be at fault. A common error message you\u2019ll encounter is \u201cEthernet doesn\u2019t have a valid IP configuration,\u201d which shows up when your PC can\u2019t get a proper IP through the Ethernet cable. Before replacing hardware, try these device-side fixes:<\/p>\n\n\n

                If your Wi-Fi works but Ethernet doesn\u2019t, the issue might be a faulty cable or a problem with the router\u2019s LAN port. Try these steps:<\/p>\n\n\n\n

              15. Use a different Ethernet cable to rule out a damaged or worn-out wire.<\/li>\n\n\n\n\n
              16. Plug the cable into a different LAN port on your router, as some ports may malfunction.<\/li>\n\n\n\n\n
              17. Make sure the Ethernet adapter on your PC is enabled in Network Connections<\/em>.<\/li>\n\n\n\n\n
              18. If possible, test the connection with a USB Ethernet adapter. If it works, the issue is likely with your computer\u2019s built-in Ethernet port.<\/li>\n\n \n\n

                These quick checks can help you determine if the problem is hardware-related before moving on to deeper device-side fixes.<\/p>\n\n\n

                3. Device or ISP problems<\/strong>: If the physical checks don\u2019t fix the issue, the problem may lie with your device\u2019s network settings or your internet provider\u2019s DNS servers. In this case, continue with deeper troubleshooting:<\/p>\n\n\n\n

              19. Flush DNS and renew IP address<\/strong>: Open Command Prompt<\/em> as administrator: press the Windows key<\/em>, type cmd, right-click Command Prompt<\/em>, and select Run as administrator<\/em>. Click Yes<\/em> if prompted.<\/li>\n\n\n\n
                \"\"<\/figure>\n\n\n

                Run:<\/p>\n\n\n

                ipconfig \/flushdns
                ipconfig \/release
                ipconfig \/renew<\/p>\n\n\n\n

                This clears outdated DNS entries and requests a fresh IP from your router.<\/p>\n\n\n\n

              20. Reset TCP\/IP (deep fix)<\/strong>: If you still can\u2019t get online, your TCP\/IP stack might be corrupted. Resetting it usually solves stubborn issues after updates or VPN installations. Again, open Command Prompt (Admin)<\/em> and run:<\/li>\n\n\n\n

                Again, open Command Prompt (Admin) and run:<\/p>\n\n\n

                netsh winsock reset
                netsh int ip reset<\/p>\n\n\n\n

                Restart your PC afterward.<\/p>\n\n\n\n

              21. Check firewall or antivirus settings<\/strong>: Open your security software and make sure it isn\u2019t restricting your Wi-Fi or Ethernet connection. You can temporarily disable it to test the connection, but remember to turn it back on afterward for protection.<\/li>\n\n\n\n\n
              22. Switch to a public DNS server<\/strong>: Sometimes your ISP\u2019s DNS is slow or unreliable, which can stop websites from loading. A good way to fix this is to use a public DNS instead:<\/li>\n\n\n\n

                You\u2019ll need to press Windows key<\/em> + R<\/em>, type ncpa.cpl, and press Enter to open Network Connections<\/em>.<\/p>\n\n\n

                Right-click your Wi-Fi or Ethernet connection and select Properties<\/em>.<\/p>\n\n\n

                Select Internet Protocol Version 4 (TCP\/IPv4)<\/em> and click Properties<\/em>.<\/p>\n\n\n

                \"\"<\/figure>\n\n\n

                Select Use the following DNS server addresses<\/em>, then enter the details for a public DNS service of your choice. For example:<\/p>\n\n\n\n

              23. Google DNS<\/a>: Preferred 8.8.8.8, Alternate 8.8.4.4<\/li>\n\n\n\n\n
              24. Cloudflare DNS<\/a>: Preferred 1.1.1.1, Alternate 1.0.0.1<\/li>\n\n \n\n
                \"\"<\/figure>\n\n\n

                Click OK<\/em> to save changes, then restart your connection.<\/p>\n\n\n

                Mac Connection Problems<\/h3>\n\n\n

                With macOS, common error messages include \u201cWi-Fi: No hardware installed\u201d and \u201cSelf-assigned IP address.\u201d These usually happen when your Mac can\u2019t get a proper IP address from the router, or there\u2019s a temporary software glitch.<\/p>\n\n\n

                \n
                  \n
                1. \n
                    \n
                  1. Run wireless diagnostics<\/strong>: MacOS has a handy built-in troubleshooting tool that can detect an issue with your Wi-Fi and offer some recommendations.<\/li>\n<\/ol>\n<\/li>\n<\/ol>\n\n\n\n\n
                  2. Press Command<\/em> + Space<\/em>, type \u201cWireless Diagnostics\u201d, and open the app.<\/li>\n\n \n\n
                  3. Click Continue<\/em> to run the test and follow instructions.<\/li>\n\n\n\n\n
                    \"\"<\/figure>\n<\/div>\n
                    \n \n
                      \n
                    1. \n
                        \n
                      1. Check the date and time<\/strong>: Before you proceed with more advanced fixes, make sure your time zone is correct and set to update automatically. This way, you\u2019ll make sure your Mac can connect properly to networks, websites, and security services that rely on accurate system time.<\/li>\n<\/ol>\n<\/li>\n<\/ol>\n\n\n\n\n
                      2. Go to System Settings > General > Date & Time<\/em>.<\/li>\n\n\n\n\n
                      3. Make sure Set time and date automatically<\/em> is turned on.<\/li>\n\n \n\n
                        \"\"<\/figure>\n\n\n\n
                      4. Confirm the Time Zone<\/em> matches your current location.<\/li>\n\n\n\n\n
                      5. If it\u2019s incorrect, select the correct time zone from the map or dropdown.<\/li>\n\n\n\n\n
                      6. Close settings and try reconnecting to Wi-Fi or Ethernet.<\/li>\n\n \n
                        \n\n
                          \n
                        1. \n
                            \n
                          1. Renew your IP address<\/strong>: This requests a new IP address from your router and can fix self-assigned IP issues.<\/li>\n<\/ol>\n<\/li>\n<\/ol>\n\n\n\n\n
                          2. Go to System Settings > Network<\/em>.<\/li>\n\n\n\n\n
                          3. Select your active connection and click Details<\/em> (or Advanced<\/em> if you\u2019re using an older version of macOS) .<\/li>\n\n \n\n
                            \"\"<\/figure>\n\n\n\n
                          4. Open TCP\/IP<\/em>, click Renew DHCP Lease<\/em>, and confirm.<\/li>\n\n \n\n
                            \"\"<\/figure>\n\n

                            <\/p>\n

                              \n
                            1. \n
                                \n
                              1. Flush DNS cache<\/strong>: When you flush your DNS cache, it\u2019s like updating your contact list \u2013 it clears outdated or corrupted address records that can stop websites from loading correctly. This forces your Mac to fetch fresh, up-to-date network information the next time you visit a site.<\/li>\n<\/ol>\n<\/li>\n<\/ol>\n\n\n\n\n
                              2. Open Terminal (easy way: click Command<\/em> + Spacebar<\/em>, then type Terminal).<\/li>\n\n\n\n\n
                              3. Type sudo dscacheutil -flushcache; sudo killall -HUP mDNSResponder and press Enter<\/em>.<\/li>\n\n\n\n\n
                              4. Enter your password when prompted.<\/li>\n\n

                                <\/p>\n

                                  \n
                                1. \n
                                    \n
                                  1. Reset network settings<\/strong>: If your Mac keeps connecting to Wi-Fi but won\u2019t get a proper IP address, reset the network to get a fresh connection.<\/li>\n<\/ol>\n<\/li>\n<\/ol>\n\n\n\n\n
                                  2. Go to System Settings > Network<\/em>.<\/li>\n\n\n\n\n
                                  3. Select Wi-Fi<\/em>, click the \u2013 button to remove the network.<\/li>\n\n \n\n
                                    \"\"<\/figure>\n\n\n