VPN setup on Deco M5
Hi,
I would like to set up my VPN so all of the traffic that goes through the TP-Link Deco M5 (tv, chromecasts, phones, tablets, etc) passes by the VPN.
Is there a way to configure that!?
Thanks!
I would like to set up my VPN so all of the traffic that goes through the TP-Link Deco M5 (tv, chromecasts, phones, tablets, etc) passes by the VPN.
Is there a way to configure that!?
Thanks!
Comments
Thank you for your response! I am sorry for the inconvenience of the issue. Unfortunately - we do not directly support the
Deco M5. Connecting to PIA on your router can be a great tool to use to protect multiple devices at one time, or to protect any device that we currently do not support.
Almost any router with VPN capability could work with our service. However, we only offer ready VPN setup guides for routers using specific router firmware. Here is a list of routers compatible with each of the currently supported firmware types:
DD-WRT -- http://www.dd-wrt.com/wiki/index.php/Supported_Devices
Tomato -- http://tomatousb.org/doc:build-types
Pfsense -- https://doc.pfsense.org/index.php/What_hardware_is_supported
https://doc.pfsense.org/index.php/IPsec_Compatibility#IPsec_Compatibility
However, if you can not locate your router within the above lists, it would appear that we do not support your router or your router does not directly support VPN services.
The directions for router-based VPN setups for this firmware can be found on this page: https://helpdesk.privateinternetaccess.com/hc/en-us/sections/204236038-Setup-Guides-Router.
In all likelihood, you will need to install ("flash") such custom router firmware onto your router. Please be aware that router flashing falls outside our support scope, and doing so would be at your discretion and liability.
It may be possible to configure VPN use on stock or other firmware, provided it has VPN configuration options, but we would not have a ready guide for its use. - PIA CS TEAM