Rt2600ac PIA setup but on only on my LG TV?

cheekybean

I have an LG C9 which runs WebOS. I know I can setup PIA through my router but am looking to only have it running on my TV as I don't want/need to be constantly running on all my devices. Does anything know if this is possible?

[Deleted User]

Hello!

Unfortunately, we do not directly support the LG C9 device or the WebOS. This does not mean connecting is impossible, we are not able to assist. However - have you tried the following:

- change servers
- change ports and protocols (tcp/udp)
- clear cache and cookies in the browser
- changed browsers to see if one is faster
- performed a clean uninstall/reinstall
(uninstalling, rebooting, then reinstalling a fresh copy)
- logged out of the application and reboot the device
(then logged back in to try and connect successfully)
- enable the 'Use Small Packets' setting in the app

If you are still inclined to try and install PIA on your RT0600AC: we only offer ready VPN setup guides for routers using specific router firmware. Here is a list of routers compatible with each of the currently supported firmware types:

DD-WRT -- http://www.dd-wrt.com/wiki/index.php/Supported_Devices
Tomato -- http://tomatousb.org/doc:build-types
Pfsense -- https://doc.pfsense.org/index.php/What_hardware_is_supported 
https://doc.pfsense.org/index.php/IPsec_Compatibility#IPsec_Compatibility

However, if you can not locate your router within the above lists, it would appear that we do not support your router or your router does not directly support VPN services. The directions for router-based VPN setups for this firmware can be found on this page: https://helpdesk.privateinternetaccess.com/hc/en-us/sections/204236038-Setup-Guides-Router. In all likelihood, you will need to install ("flash") such custom router firmware onto your router. Please be aware that router flashing falls outside our support scope, and doing so would be at your discretion and liability. 

These options are not a one simple fix and may be periodically used to connect. You can also look into our Forums Page or use a search engine like Google to see if anyone has successfully set up our service this way. Please let me know if there is anything else I can assist you with! Thank you for your patience and for allowing us to serve you for your VPN needs.

clarc

I use PIA with download station.

Google OpenVPN and PIA

use this walkthrough to set it up:

http://petestechblog.com/archives/1093 Lucky Patcher Kodi

I have been using this setup for 2+ years without any notices from two different cable ISP's.

I really wish Synology could build in a feature that if my VPN is not connected to stop the download station service.